Skip to main content


The L-505uXII is the eagerly awaited Mark II version of the popular L-505uX that has been at the forefront of pre-amplifier design since it's launch in 2011. Incorporating an abundance of proprietary technologies, such as Luxman's Version 4.0 ODNF (Only Distortion Negative Feedback), as well as LECUA (Luxman Electronically Controlled Ultimate Attenuator), this product is a truly multifunctional integrated amplifier. As Luxman's latest high-end model, the L-505uXII continues the evolution of the L-505 series, which has attracted many fans of audio quality and earned a great reputation. As an amplifier which exudes sophistication and authenticity beyond its class, the L-505uXII represents the latest in a long line of exemplary models.

  • Rated output
    100W + 100W (8Ω),
    150W + 150W (4Ω)
  • Input sensitivity/input impedance
    PHONO (MM): 2.5mV/47kΩ
    PHONO (MC): 0.3mV/100Ω
    LINE: 180mV/47kΩ
    BAL.LINE: 180mV/55kΩ
    MAIN-IN: 1V/47kΩ
  • Output voltage
    REC OUT: 180mV, PRE-OUT: 1V
  • Frequency response
    PHONO: 20Hz to 20kHz (within -3dB)
    LINE: 20Hz to 100kHz (within -3dB)
  • Total harmonic distortion
    0.009% or less (8Ω, 1kHz)
    0.09% or less (8Ω, 20Hz to 20kHz)
  • S/N ratio (IHF-A)
    PHONO (MM): 91dB or more
    PHONO (MC): 75dB or more
    LINE: 104dB or more
  • Volume adjustment
  • Amplification circuit
    ODNF 4.0
  • Output configuration
    Bipolar parallel push-pull
  • Damping factor
  • Max. amount of tone control
    BASS: ±8dB at 100Hz
    TREBLE: ±8dB at 10kHz
  • Power supply
    230V~(50Hz) / 115V~(60Hz)
  • Power consumption
    85W (under no signal), 0.4W (at standby)
  • External dimensions
    440(W) x 178(H) x 454(D) mm
    front side knob of 20mm and rear side terminal
    of 27mm included in depth
  • Net weight
    22.5kg (main unit)
  • Accessories
    Remote control (RA-17A)
    Power cable
  • Speaker terminal Supported Y-lug terminal dimension
    Width of part a: 15mm or less
    Width of part b: 8mm or more
    * Connection may not be performed
    depending on the shape of the
    Y-lug terminal.



Datum Aangepast


1 July 2019