L-590AXII
LUXMAN has been at the forefront of integrated amplifier design since releasing the first Japanease integrated amplifier, the SQ5A, in 1961.For over 50 years, LUXMAN has been confronting the challenges of balancing performance, function and design in an integrated amplifier body. These years of research and experience have resulted in the L-590AXII, the ultimate complete integrated amplifier design.With unprecedented spatial expression - and a sense of density particular to Class A design - outstanding realisation of tonal quality and penetrating audio ability have been achieved in this Class A integrated amplifier.The integrated L-590AXII introduces a combination of high grade technologies found in LUXMAN separate amplifiers, such as the original amplification feedback circuit ODNF4.0, LR independent block capacitors, discrete configured buffer circuits and the newly developed LECUA 1000.The L-590AXII is the peak of integrated amplifier design, amalgamating tried and tested know how and state of the art technology.The L-590AXII is the debut flagship model of integrated amplifier from LUXMAN to commemorate the 90th anniversary of this ground-breaking company.
-
Rated output30W + 30W (8Ω), 60W + 60W (4Ω)
-
Input sensitivity/input impedancePHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 550mV/47kΩ -
Output voltageRECOUT: 180mV, PRE OUT: 1V
-
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (+0, ±3.0dB) -
Total harmonic distortion0.005% or less (8Ω, 1kHz)
0.02% or less (8Ω, 20Hz to 20kHz) -
S/N ratio (IHF-A)PHONO (MM): 91dB or more,PHONO (MC): 75dB or more
LINE: 107dB or more -
Volume adjustmentNew LECUA1000
-
Amplification circuitODNF 4.0
-
Output configurationBipolar 3-parallel push-pull
-
Damping factor320
-
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
-
Power supply230V~(50Hz) / 115V~(60Hz)
-
Power consumption330W
260W (under no signal), 0.5W (at standby)
-
External dimensions440(W) x 193(H) x 463(D) mm
front side knob of 20mm and rear side terminal of 37mm included in depth
-
Net weight28.4kg (main unit)
-
AccessoriesRemote controller (RA-17A)
Power cable -
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Type |
Bestandsnaam |
Datum Aangepast |
||
---|---|---|---|---|
Pricelist |
|
1 July 2019
|